Bk-precision 830C - Manual Manual de usuario descargar pdf (Pagina 102)

100

The guard terminal is used to minimize noise and to

help minimize parasitic components of the capacitor to

be measured, thus allowing for more accurate results.

SPECIFICATIONS

Below are some remarks in regards to all

specifications pertaining to both 830C and 890C

capacitance meters.

*Specifications are subject to change without notice.

The following conditions must be met for the

specifications to be valid:

1. Measurements are performed at the test

socket.

2. DUT and test leads must be properly shielded

via the guard terminal if necessary.

3. Measurements are made after 30 minutes of

warm up time and operated at 23 °C +/- 5 °C,

<75% R.H.

4. Accuracy specification valid for

measurements within 10% to 100% of full

scale of range; values outside of range should

be used for reference only.

5. Battery powered operation.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 112 113

Sin comentarios

Bk-precision 830C - Manual Manual de usuario Pagina 102