Bk-precision 2552-2559 - Programming Manual Manual de usuario

PROGRAMMING MANUAL Digital Storage Oscilloscope MODEL: 2550 Series (2552, 2553, 2554, 2555, 2556, 2557, 2558, 2559)

10 command. TRCP TRIG_COUPLING ACQUISITION Sets the coupling mode of the spe

100 DESCRIPTION The STOP command immediat

102 DESCRIPTION The STORE_PANEL command

104 DESCRIPTION The SAST? query the ac

106 DESCRIPTION The SANU? query returns

108 DESCRIPTION The SET50 command se

110 DESCRIPTION The TIME_DIV command mo

112 DESCRIPTION The TRACE command enabl

114 DESCRIPTION The TRIG_COUPLING comman

116 DESCRIPTION The TRIG_LEVEL command a

118 DESCRIPTION The TRIG_SELECT command is

12 DESCRIPTION The ARM_ACQUISITION command ena

120 DESCRIPTION The TRIG_SLOPE command sets the tri

122 DESCRIPTION The VERT_POSITION comma

124 DESCRIPTION The VERTICAL command cont

126 Note: Offset data factor is a 4 byte floating point number starting at a

128 QUERY SYNTAX WaveForm_SetUp? Note 1: Aft

130 DESCRIPTION The XY_DISPLAY command en

132 F FILENAME, FLNM,Command/Query, FORMAT_VDISK, FVDISK, Query, FILTER, FI

134 U UNIT, UNIT, Command/Query, V VOLT_DIV, VDIV,Command/Query, VERTICAL,

DSO: TEMPLATEExplanation of the formats of waveforms and their descriptors on theDSOA descriptor and/or a waveform consists of one or several logical

byte days (1 to 31) byte months (1 to 12)

< 68> RES_ARRAY2: long < 72> RES_ARRAY3: long ; 2 expansion entries are reserved The following variable

; each min/max pair.<154> PAIR_OFFSET: word ; for Peak Dectect waveforms only

_3 sparsed _4 autoscaled _5 no_result _6 ro

14 DESCRIPTION The AUTO_CALIBRATE command is us

_5 100_mV/div _6 200_mV/div _7 500_mV/div _8 1_V/div

16 DESCRIPTION The AUTO_TYPESET command sele

18 DESCRIPTION BANDWIDTH_LIMIT enables or disa

2 TABLE OF CONTENTS Using Status Registers ...

20 DESCRIPTION The *CAL? query cause the oscil

22 DESCRIPTION The *CLS command clears all t

24 ADDITIONAL INFORMATION Command Error Status Register Structure (CMR) Com

26 DESCRIPTION The COUPLING command

28 DESCRIPTION The CURSOR_SET comman

30 DESCRIPTION The CURSOR_VALUE? Query retur

32 DESCRIPTION The CSV_SAVE command selects

34 DESCRIPTION The response to the CYMOMETE

36 DESCRIPTION The DDR? Query reads a

38 DESCRIPTION The DELETE_FILE command

4 followed by a presentation of the formal syntax, with the header given in

40 DESCRIPTION The DOT_JOIN command

42 DESCRIPTION The *ESR? query read

44 Notes (1) The Power On (PON) bit is always turned on (1) when the unit i

46 ADDITIONAL INFORMATION Execution Error Status Register Structure (EXR) Va

48 DESCRIPTION Causes the instrument

50 DESCRIPTION The FILTER command enable

52 DESCRIPTION The FFT_WINDOW comman

54 DESCRIPTION The FFT_SCALE command sel

56 DESCRIPTION The GRID_DISPLAY comma

58 DESCRIPTION The HOR_MAGNIFY command hori

6 CRST? CURSOR_SET? CURSOR Allows positioning of any one of eight cursors. C

60 DESCRIPTION The HARDCOPY_SETUP com

62 DESCRIPTION The INTENSITY command

64 DESCRIPTION The INR? query reads a

66 DESCRIPTION The INVERTSET command

68 DESCRIPTION The MENU command enabl

70 DESCRIPTION The MATH_VERT_DIV comm

72 DESCRIPTION The OFFSET command

74 DESCRIPTION The *OPT? query identifi

76 DESCRIPTION The PARAMETER_CUSTOM comm

78 RELATED COMMANDS CURSOR_MEASURE, CURSOR_SET, PARA

8 measure. OFST OFFSET ACQUISITION Allows output channel vertical offset adj

80 DESCRIPTION The PERSIST command enab

82 DESCRIPTION The PANEL_SETUP command

84 DESCRIPTION The PF_SET command sets

86 DESCRIPTION The PF_CONTROL command c

88 DESCRIPTION The PF_DATADIS? query ret

90 DESCRIPTION The RECALL command recal

92 DESCRIPTION The *RST command ini

94 DESCRIPTION The *SAV command st

96 DESCRIPTION The SCREEN_SAVE comm

98 DESCRIPTION The *STB? query read