BK Precision 4086 Especificaciones

Operating Manual Model 6010/6011/6012/6013 Highspeed Programmable Attenuator

7⑧READ CLOCK - Key for selection of program memory read clock frequency. ⑨READ MODE - Key for selecting BURST, GATE or FREE program execution mode

8 3.2 Rear panel ①AC line input - Connector for supplying AC power to the instrument. Use the provided power cord to connect to a power outlet.

9 4. Operation 4.1 Manual and program mode - Select the attenuator control mode. The cursor on the screen moves to [MANUAL] or [PRGM] at positi

10 4.3 FILTER - Set the attenuator switching response time. The cursor moves to the position indicated below when the <FILTER> key is press

11ＰＲＧＭ　５００ＫＨｚ　Ｌ：１３１０７２Ｐ：６．５５３５ｓ　ＦＲＥＥ　　１０μｓ - Move the cursor using cursor keys, and set a value in the range of 8 - 131072 using the rotary knob.

12 ② When [CLOCK] is selected the main screen is displayed and the cursor moves to the position indicated below. ＰＲＧＭ　５００ＫＨｚ　Ｌ：１３１０７２Ｐ：６．５５３５ｓ　Ｆ

13① When [FREE] is selected, the program is read (i.e., run) and a delay of the pause time is created. This is repeated continuously. ② When

144.9 Setup menu table ＡＴＴＥＮ　ＭＯＤＥ ＭＡＮＵＡＬ ＡＴＴＥＮＰＲＧＭＲＥＡＤ　ＭＯＤＥＰＡＵＳＥ　ＴＩＭＥＰＲＧＭ　ＬＥＮＧＴＨＲＥＡＤ　ＣＬＯＣＫＴＩＭＥＯＦＦＣＬＯＣＫＦＩＬＴＥＲＳＥＴ　ＵＰ ＲＳ２３２ＣＧＰＩＢ 4.10 List of abbreviat

155. Software for creating attenuation profiles 5.1 Minimum system requirements - Windows PC with Windows 98/NT/2000/XP/Vista - CD-ROM drive - RS

16Ｙ　ＳｃａｌｅＸ　ＳｃａｌｅＶｅｒｔｅｃａｌ　ＺｏｏｍＨｏｒｉｚｏｎｔａｌ　ＺｏｏｍＶｉｅｗ Ｚｏｏｍ　ＩｎＺｏｏｍ　ＭａｘＺｏｏｍ　ＭｉｎＺｏｏｍ　ＯｕｔＺｏｏｍ　ＩｎＺｏｏｍ　ＭａｘＺｏｏｍ　ＭｉｎＺｏｏｍ　ＯｕｔＬｅｎｇｔｈＴｉｍｅＦｕｌｌ　ＳｃａｌｅＡｍｐｌ Ｓｕｂ　Ｗａｖｅ　Ｆｏｒ

IBefore use Thank you for your purchase of the Highspeed Programmable Attenuator model 6010/6011/6012/6013. Please check the following prior to

175.4 Operation (1) File - New Open a new edit screen. - Open Read the attenuation waveform data from a File and display it in the edit screen.

18- Transmit… Transfer the attenuation data to the 6010/6011/6012/6013 - COM Port Configure your PC’s COM Port - Baud Rate Select the baud (transf

19(2)Edit - Undo Cancel the previous action. - Cut Cut the selected data to the buffer. - Copy Copy the selected waveform data to the buffer. - P

20(3)View - Horizontal / Vertical Zoom Enlarge or reduce the horizontal axis, with the left end of the screen as the reference. Zoom In Zoom Out

21(4)Math - Add Wave Form Add a standard waveform, to the wave form in the editing window. - Add Wave Buffer Add the cut or copied data in the bu

22-Clipping Limit (clip) the waveform to the limit points (Y1, Y2) within the horizontal range defined by (X1, X2) ‚w‚P ‚w‚Q‚x‚P‚x‚Q‚w‚P ‚w‚Q‚x‚P‚x‚

23 - Mirror/Vertical On the graph f(x) between X1 and X2, reflect f(x) about a horizontal line The waveform is being reflected about a horizontal li

24 The data will be compressed according to the factor selected. Example: The maximum amplitude of a sine wave profile is 20dB. By selecting 5

25automatically connected to the existing waveform. Or: Modify an existing waveform by clicking on the waveform, then dragging it to a new area. - S

26Parameter Setting range Applicable waveform LENGTH [W] (number of data) 8 – 131072 All waveforms CYCLES (cycle) 1 – 100 All except DC

IITable of Contents １．Overview 1 ２．Specifications 2 ２．１ Performance 2 ２．２ External appearance and dimensions drawing 5 ３．Description of pane

27 - About The program’s version information is displayed.

28 6. Remote interface 6.1 RS232C protocol Configuration of RS232 interface: Transfer rate: 2400/4800/9600/19200/38400/57600 Stop bit: 1 b

29Each attenuation value is represented by one 16 bit word. The hexadecimal code for this word is coded as followed: ８６４０ Controls the SyncOut

30which is not used. CRLF (EOI) is transmitted as a termination string. 6.3 Command list Command Data part Explanation MAN --- The control mo

16.4 Example program Below is a code sample created with Visual Basic 6.0. The complete Visual Basic project, including the executable, can be d

1Service Information Warranty Service: Please return the product in the original packaging with proof of purchase to the address below. Clearly st

1 OM-0712 Rev. 1.01 Printed in Japan © 2007 B&K Precision Corp. B&K Precision Corp. 22820 Savi Ranch Parkway Yorba Linda, CA 92887, USA TE

11. Overview The Highspeed Programmable Attenuator Models 6010/6011/6012/6013, the 6010 series, provide attenuation of up to 80dB in steps of 0.0

22. Specifications 2.1 Performance Model 6010 Model 6011 Frequency range 1.5 to 4.5 GHz 3.0 to 9.0 GHz VSWR < 1.5 @ 2 to 4 GHz < 2.0 @ 1.5

3 Input damage level Connector Trigger input Input level Input impedance Minimum pulse width Input damage level Connector SYNC o

4 Supported OS Waveform creation Standard waveforms Parameters Straight line Math Functions Editing options File menu Windo

5 2.2 External appearance and dimensions drawing Units in mm

6 3. Description of panels 3.1 Front panel ①POWER - Main power switch. ②READ CLOCK IN - READ CLOCK input terminal. Apply an external clock